Omron S8VS-48024

0₫

Mô tả

Omron S8VS-48024

Xuất xứ: Trung Quốc

Manufacturer	Omron
Model	S8VS-48024
Power rating	480 W
Output voltage	24 V
Rated output current	20 A
Maximum peak current	30 A
Rated input voltage	100 to 240 VAC
Rated input current	7.4 A max., 5.8 A typ. (at 100 VAC input)
Frequency	50/60Hz (47 to 63 Hz)
Weight	Approx. 1700 g
Dimension	150 x 127.2 x 119.5 mm (L x W x H)

• Specification:

Efficiency	83% min.
Harmonic current emissions	Conforms to EN61000-3-2
Power factor	0.95 min
Leakage current	100-V input: 0.5 mA max. 200-V input: 1.0 mA max.
Inrush current	100-V input: 25 A max. (for a cold start at 25°C) 200-V input: 50 A max. (for a cold start at 25°C)
Output voltage adjustment range	−10% to 15% (with V.ADJ)
Ripple	2.0% (p-p) max. (at rated input/output voltage)
Input variation influence	0.5% max. (at 85- to 264-VAC input, 100% load)
Output load variation influence (rated input voltage)	1.5% max. (with rated input, 0 to 100% load)
Temperature variation influence	0.05%/°C max
Start up time	1,000 ms max. (at rated input/output voltage)
Hold time	20 ms min. (at rated input/output voltage)
Overload protection	105% to 160% of rated load current, voltage drop, automatic reset
Overvoltage protection	Yes
Series operation	Yes for up to 2 Power Supplies (with external diode)
Parallel operation	No
Output voltage indication	No
Output current indication	No
Peak-hold current indication	No
Maintenance forecast monitor ouput	No
Total run time monitor output	No / Yes (transistoroutput), 30 VDC max., 50 mA max
Total run time monitor indication	No
Undervoltage alarm indication	No
Undervoltage alarm output terminals	No / Yes (transistor output), 30 VDC max., 50 mA max
Dielectric strength	3.0 kVAC for 1 min. (between all inputs and outputs/alarm outputs; detection current: 20 mA) 2.0 kVAC for 1 min. (between all inputs and PE terminals; detection current: 20 mA) 1.0 kVAC for 1 min. (between all outputs/ alarm outputs and PE terminals; detection current for standard 240-W and 480-W models: 30 mA, detection current for 240-W models with indication monitor: 20 mA) 500 VAC for 1 min. (between all outputs and alarm outputs; detection current: 20 mA)
Insulation resistance	100 MΩ min. (between all outputs/ alarm outputs and all inputs/ PE terminals) at 500 VDC
Vibration resistance	10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions 10 to 150 Hz, 0.35-mm single amplitude (3 G max.) for 80 min each in X, Y, and Z directions: 480 W
Shock resistance	150 m/s2, 3 times each in ±X, ±Y, and ±Z directions
Operating ambient temperature	Refer to the derating curve in Engineering Data (60-W, 90-W, 120-W, 180-W, 240-W, and 480-W Models). (with no icing or condensation)
Storage temperature	−25 to 65°C
Operating ambient humidity	25% to 85%
Storage humidity	25% to 90%
SEMI	F47-0200 (200-VAC input)
Approved standards	UL: UL508 (Listing), UL60950-1 cUL for 240-W models with indication monitor: CSA C22.2 No.14, cUL for 240-W standard models and 480-W models: CSA C22.2 No.107.1, cUR: CSA No. 60950-1, EN/VDE: EN50178 (=VDE0160), EN60950-1 (SELV) (=VDE0805 Teil 1) According to VDE0106/P100, IP20 (except terminal block)