TDR-240-24

0₫

Mô tả

TDR-240-24

Xuất xứ: Trung Quốc

Brand	Meanwell
Series	TDR-240
Type of power supply	switched-mode
Output Voltage	24 V
Output rated current	10 A
Power Rating	240 W
Input Voltage	380~480 V (three phrase)
Input current	690mA
Operating temperature	-30...70°C
Freq.	50-60 Hz
Body dimensions	63x125.2x113.5mm
Weight	1 kg

• Specification:

Ripple & noise (max.)

100mV Pk-Pk

Voltage adj. range

24 - 28V

Voltage tolerance

±1.0%

Line regulation

±0.5%

Load regulation

±1%

Setup, rise time

2000ms, 60ms/400VAC 1500ms, 60ms/500VAC at full load

Hold up time (typ.)

20ms / 400VAC 40ms / 500VAC at full load

Power factor

PF 0.53/400VAC PF 0.52/500VAC at full load

Efficiency

92%

AC current (typ.)

0.69A/400VAC 0.6A/500VAC

Inrush current (typ.)

COLD START 50A

Leakage current

<2mA / 530VAC

Overload protection

105 ~ 130% rated output power

Protection type : Constant current limiting, unit will hiccup after 3 sec.

Over voltage protection

30 ~ 36V

Protection type : Hiccup mode, recovers automatically after fault condition is removed.

Working temp.

-30 ~ +70 (Refer to "Derating Curve")

Working humidity

20 ~ 95% RH non-condensing

Storage temp., humidity

-40 ~ +85 , 10 ~ 95% RH non-condensing

Temp. coefficient

± 0.05%/℃ (0 ~ 60℃ )

Vibration

Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

Operating Altitude

5000 meters

Safety standards

UL61010-1, UL61010-2-201, EAC TP TC 004 EN61558-1, EN61558-2-16, approved

Withstand voltage

I/P-O/P:4.87KVAC I/P-FG:2.4KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC

Isolation resistance

I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25 / 70% RH

EMC emission

Parameter	Standard	Test Level / Note
Conducted	EN55032(CISPR32)/EN61204-3	Class B
Radiated	EN55032(CISPR32)/EN61204-3	Class B
Harmonic Current	EN61000-3-2	Class A
Voltage Flicker	EN61000-3-3	-----

EMC immunity

Parameter	Standard	Test Level / Note
ESD	EN61000-4-2	Level 4, 15KV air ; Level 4, 8KV contact
Radiated Field	EN61000-4-3	Level 3
EFT / Burst	EN61000-4-4	Level 3
Surge	EN61000-4-5	Level 4, 2KV / Line-Line, Level 4, 4KV/ Line-Earth
Conducted	EN61000-4-6	Level 3
Magnetic Field	EN61000-4-8	Level 4
Voltage Dips and Interruptions	EN61000-4-11	＞95% dip 0.5 periods, 30% dip 25 periods＞ 95% interruptions 250 periods